How To Tighten Loose Wooden Joints Professionally DIY
Describes how to use Behlen Swel Lock to tighten loose wooden joints.
For more info or to purchase:
Actually swells wood for tightening loose chair rungs and mortise joints. It is not a glue or an adhesive. 2 oz.
Important Not For Sale In The Following States: CA, CT, DC, DE, MA, MD, ME, NH, NJ, NY, PA, RI, VA, VT
Note:
Swel-Lock™ Wood Sweller is designed to tighten loose chair rungs, dowel and mortise joints, hammer and axe handles, wooden handled chisels and other types of socket joints when one member is wooden. It soaks into wood causing it to swell in size.
Step 1
Take the problem joint apart if possible. If not, loosen the problem joint as much as possible. Position the furniture to be repaired such that the loose joint is below the entry point of the rung or such that the mortised piece is below the entry point of the tenoned piece. In other words, position the loose joint so that the applied Swel-Lock will run down into that joint.
Step 2
Apply Swel-Lock liberally on the wood parts. Put the joint back together and press tightly. If the joint will not come apart, apply Swel-Lock around the joint and allow it to run into said joint. Apply Swel-Lock until the parts or the joint is saturated. Use the cloth to wipe away any Swel-Lock that has not gone into the joint or has seeped out.
Step 3
Allow the joint to dry. The dry time depends on the depth of the joint, the size of the joint, and the looseness of the joint. One to three hours is about the average dry time. Some joints take longer.
Step 4
Test the joint for stability. If it is still loose, repeat steps 1 to 3.