One Stop General Store
Fun times travelling in Huntsville, ON
Standing Together CUPW 2018
Song and musical talent provided with full permission by creators, Robert and Marion Brown...
The public is mostly unaware that not one single cent of your tax dollars goes towards our salary, just the opposite. Canada Post is completely self-sustaining. We contribute from our corporate profits to HELP the economy. We are also directly responsible for Maternity Leave laws in Canada.
That was our fight in the 80's and WE WON IT for all Canadian women.
This go-round with Canada Post is less about money, and more about Workplace Safety, and Workers Injuries. Did you know that Canada post jobs have the HIGHEST rate of on the job injury in Canada, and it's RISING??? Despite this, we are overburdened, and forced to do unwanted overtime. We need to fight to correct this.
Unions such as CUPW and their decades fights are responsible for the very existence of The Labour Board of Canada, as well as WSIB. That Disabilty cheque you are entitled to if you get sick or injured and can't work...? That Social Security or Social Assistance cheque...??? Yep... UNIONS helped put those laws and programs in place. We as Canadians are entitled to safer working condition Canada-Wide, and it's not just the postal workers who deserve this... ALL Canadians deserve this!!!
What we fight for and win is examined, and more than often applied to the public sector worker through our own Labour Laws. Think about that... Kill the unions, and what is to stop the corporations from killing off the system that protects the public sector worker?
We can help make better working conditions for ALL Canadians! Please read up on our fight...
We are fighting for Better and SAFER Working Conditions, Pay Equity for Women, EQUALITY for Rural and Suburban Mail Carriers who are mostly women, and do the same job as our mostly male Urban members but are paid almost 30% less. but are forced to do unpaid-for overtime daily... Inequality STILL exists in Canada, and it's time to change that.
We are fighting to make our Ecological footprint less harmful and more helpful to our environment, for the right to check up on and help our aging population, help safeguard the communities we deliver to, and for Postal Banking services to be provided to small communities where banks are closing down in alarming numbers, leaving them vulnerable to interest gouging money lending stores or untrustworthy banking machines that are often tampered with in corner stores and local gas stations.
It's not just about money and greed. Please read up on our causes and join our fight. Unions are a weapon against poverty, injuries and injustices to all workers, standing together in Solidarity.
Security Guard Salary in Qatar
To learn more about this video visit
Like our facebook page for regular update
Follow us on twitter
Atlanta News | 11Alive News: Primetime Jan. 15, 2020
11Alive News: Primetime is live news for whenever your day ends or begins. Weeknights from 8-11pm EST, our team of journalists will bring you the news of the day and the latest information as it develops.
Have thoughts on these stories or an idea for a story we need to talk about? Leave a comment! 11Alive is Where Atlanta Speaks. We believe that news shouldn’t be a one-way conversation, but a dialogue with you. Join in, share your thoughts and connect with new perspectives.
Follow 11Alive on Social:
Facebook:
Twitter:
Instagram:
Subscribe to 11Alive for exclusive content:
Visit Site:
Jobs That Need HTML Skills
Looking to learn to code check these plans
Monthly Plan
Yearly Plan
Looking to learn to code and make money online look below plans
Yearly Plus Plan
Lifetime Plan
???????????? | Looking to Learn to Code visit
???????????? | Need Gear As a Developer visit
???? | Earn Over 100k Per Year in A Great Career
???? | Unlimited Access To All My Courses You need to Get Hired!
???? | 100% Quality Guarantee
???? | SSL Secured Checkout
???? | Support CodingPhase HQ to Help Get More People in The Tech Industry
????️ | Buy My Courses on UDEMY:
????| Check out my gear on Kit:
People always ask me what other courses you think are good and here's my list????????
???? Ultimate MYSQL Course
▶
???? Web Developer Bootcamp
▶
???? JavaScript: Understanding the Weird Parts
▶
???? ES6 Javascript
▶
???? Learn React
▶
???? Angular 4 the complete guide
▶
#CodingPhase #TheCodingWay
Travel to the Northeast with an RV
After becoming stranded in North Carolina in the path of Hurricane Florence I was finally able to get on the road. Then we visited unlikely RV destinations such as Philadelphia, New York, and Boston. Also a very short stay in the state on Maine.
Become a member and enjoy additional perks:
Original music soundtrack and other merch available at
Help make my video production sustainable
We tow a 2015 Winnebago Micro Minnie 1706FB travel trailer, with a 2019 Chevrolet Colorado LT 2X4 V6
You are more than welcome to tag along in our travels by subscribing to this channel.
My favorite Amazon products.
Join the community at:
Patreon
Facebook Group
Music:
CDs, stickers and t-shirts at
Digital downloads:
Apparel:
Some of the upgrades I've done to our Micro Minnie:
Micro Air Soft Start System and Westinghouse iGen 2500 generator (use promo code MYRV for a discount)
Cell Phone Signal Booster: weBoost Drive 4G-X RV 470410
WiFiRanger: Internet on the road.
use promo code STEHLIK5 for a 5% discount
RVLock
TPMS: TireMinder TM55c-B Tire Pressure Monitoring System (TPMS) for Trailers, Travel Trailers, Toy Haulers, 5TH Wheels And More
Towing Mirrors: Fit System 3891
Fantastic Vent
Solar system: Renogy 100 Watts 12 Volts Monocrystalline Solar Starter Kit
Generators:
Westinghouse iGen 2500
Champion Power Equipment 75537i 3100 Watt RV Ready Portable Inverter Generator with Wireless Remote Start
IN MY BASEMENT
Weber 51010001 Q1200 Liquid Propane Grill, Black
Weber 6557 Q Portable Cart for Grilling
Coleman Outdoor Compact Table
Coleman 333264 Propane Fuel Pressurized Cylinder, 16.4 Oz
Quik Chair Folding Quad Mesh Camp Chair - Blue
Portable Folding Rocking Chair
Camco Mfg Inc 44543 Large Stabilizer Jack Pad with Handle, 2 Pack
Bulls Eye Level RV Appliance and Game Table Leveler Motorhome Level (Mini Level)
Tri-Lynx 00015 Lynx Levelers, (Pack of 10) by Tri-Lynx
Camco 39755 RhinoFLEX 6-in-1 Sewer Cleanout Plug Wrench
Cartman 14 Cross Wrench, Lug Wrench
Rubbermaid Cooler, 10 qt., Red (FG2A1104MODRD)
Trailer Aid Tandem Tire Changing Ramp
Camco 40043 TastePURE Water Filter with Flexible Hose Protector
CAMERAS and OTHER GEAR
Main camera: TBA
Action camera: Sony FDR X3000
Additional action camera: GoPro Hero 3 White Edition
LED light: NEEWER 160 LED CN-160
Drone: DJI Mavic Pro
Tripods and selfie sticks:
Manfrotto MTPIXI-B PIXI Mini Tripod
JOBY GorillaPod Original Tripod
Waterproof Telescopic Pole and Floating Hand Grip for Action Cam
AUDIO:
Field Audio Recorder: Zoom H1
Audio-Technica ATR-3350 Lavalier Omnidirectional Condenser Microphone
Sony MDR-7506 Headphones
SOCIAL MEDIA LINKS:
FACEBOOK:
TWITTER:
INSTAGRAM:
#rvlife #rving #
Starr Forum: The Madhouse Effect
How climate change denial is threatening our planet, destroying our politics, and driving us crazy
A transcript of the event is available at
Speaker: Michael Mann, award-winning climate scientist
Michael Mann is Distinguished Professor of Atmospheric Science at Penn State, with joint appointments in the Department of Geosciences and the Earth and Environmental Systems Institute (EESI). He is also director of the Penn State Earth System Science Center (ESSC). He is author of more than 200 peer-reviewed and edited publications, numerous op-eds and commentaries, and four books including Dire Predictions: Understanding Climate Change, The Hockey Stick and the Climate Wars: Dispatches from the Front Lines, and The Tantrum that Saved the World.
Recorded on Wednesday, March 06, 2019 at 4:30pm to 6:00pm
at MIT Building 6, 120
The MIT Center for International Studies (CIS) is a world premier, university-based research and education center. Learn more at
The MIT Starr Forum is a flagship public event series hosted by CIS. Learn more at
Where is CareCredit accepted? How to find providers and retailers | CareCredit
The first step to getting care is finding a provider. That's why CareCredit is always working to grow the list of providers and retailers in our network. You can use your CareCredit card at more places for health, wellness and personal care needs for the whole family. Learn more at:
CareCredit is accepted at over 200,000 locations nationwide and including dental and vision care providers, veterinary offices, day and medical spas, urgent care, cosmetic and chiropractic, orthopedic, primary care and other healthcare providers. You can also use it with our partners, Rite Aid, LensCrafters and Bowflex.
Be prepared and have peace of mind knowing CareCredit is there for you.
Making care possible...today.
Subscribe to our YouTube channel:
Like us on Facebook:
Follow us on Twitter:
Join us on LinkedIn:
Follow us on Instagram:
Epic and Honest Mobile Home Commercial
Cullman Liquidation is the 5th local commercial of our I Love Local Commercials Series sponsored by MicroBilt ( )
--
Nominate your favorite local business for a FREE local commercial at: Watch all of our RhettandLinKommercials and see who's been nominated!
--
Everything Robert said in this commercial is true. Watch the behind-the-scenes episode now:
--
This ad was written, directed, and edited by your trusty Internetainment duo, Rhett & Link. Distributed by Tubemogul.
---
We received this email from Star on 11/21/09:
Hey guys,
Sad news, Matt, (one of the movers [in the white tank top] from the commercial) passed away today. He was driving home a few nights ago from his job in another town and fell asleep at the wheel. He was 22, has a 3 mth old son, and was to be married this week.
Please be careful when you're out on the road.
Your friend,
Star*
---
Our deepest condolences to Matt's family.
House Judiciary Committee Debates on Articles of Impeachment
The House Judiciary Committee debates two articles of impeachment against President Trump: abuse of power and obstruction of Congress. Watch LIVE on C-SPAN3, listen on C-SPAN Radio and watch online at c-span.org
WATCH LIVE: CBC Vancouver News at 6 for July 25 — Canada-Wide Manhunt, Border Politics, Heat Wave
Watch CBC Vancouver News at 6 with hosts Anita Bathe and Mike Killeen for the latest on the most important news stories happening across B.C. They're joined by meteorologist Johanna Wagstaffe who brings you the most up to date weather forecasts and added expertise on what's trending in the world of science.
Snap-On NO Longer Made in the USA - MADE OVERSEAS????
Where are Snap On hand tools made? This kind of threw me for a loop since everyone always says that Snap On hand tools are made in the United States of America. Please don't get me wrong, I like Snap On still.
Snap-on is an American designer, manufacturer and marketer of high-end tools and equipment to professional tool users. Founded in 1920, Snap-on is located in Kenosha, Wisconsin, and employs approximately 11,500 people worldwide. The company is currently worth US $9.5 billion and is included in the S&P 500.
Snap-on was founded as the Snap-on Wrench Company in Milwaukee, Wisconsin in 1920 by Joseph Johnson and William Seidemann.[3] As a new socket wrench manufacturing company, the business manufactured and marketed ten sockets that would snap on to five interchangeable handles. Their slogan was 5 do the work of 50
Snap-on walk-in dealer van, Westland, Michigan
After World War II, Palmer advertised for a military officer to organize and develop a larger sales force for the expected post-war sales boom. Newton Tarble was hired, and came up with the idea of developing routes for company dealers to see mechanics on a weekly basis. Eventually these salesmen became independent businessmen and authorized dealers using larger walk-in vans to carry a growing product line. Thus, Snap-on tools are sold only by dealers and none are sold in retail stores. Their quality is highly regarded but their prices are also among the very highest. Snap-on currently operates plants in various states and cities such as Milwaukee, Wisconsin and Elizabethton, Tennessee, which manufacture hand tools. Pneumatic tools are currently manufactured in Murphy, North Carolina.
In 1975, Snap-on opened a manufacturing plant in Johnson City, Tennessee and closed the plant 32 years later in 2007. The Murphy, North Carolina plant was named as one of the top 10 plants in North America by Industry Week. [4] In 1999, Snap-on acquired Bahco, a Swedish hand tool brand. Bahco hand tools are designed and manufactured by SNA Europe, the European manufacturing subsidiary of Snap-on Incorporated.
More About BundysGarage:
Questions, Comments, Concerns:
bundysgarage@gmail.com
Twitter:
@bundysgarage
On The Web:
Music by Randall Kent: As seen on NCIS
All Rights Reserved 2016
© Copyright 2016
Bundys Garage
All rights reserved. This material may not be published, broadcast, rewritten or redistributed in whole or part with out the express written permission. Contact: bundysgarage@gmail.com
DISCLAIMER - DISCLAIMER - DISCLAIMER
Due to factors beyond the control of BundysGarage, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. BundysGarage assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. BundysGarage recommends safe practices when working with power tools, automotive lifts, lifting tools, jack stands, electrical equipment, blunt instruments, chemicals, lubricants, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of BundysGarage, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the end user and not BundysGarage nor any of it’s subsidiaries.
Costco Hearing Aids | The GOOD, The BAD, & The UGLY
Costco Hearing Aids | The GOOD, The BAD, & The UGLY. Dr. Cliff Olson, Audiologist and Founder of Applied Hearing Solutions, answers the question of Are Costco Hearing Aids Good?
Website:
Clinic Website:
There is no question that Costco Hearing Aids are popular, but I keep getting the same question, Are Costco Hearing Aids Good?, and I always respond by saying, it depends on how good the Costco hearing care provider is at programming them, and if they follow best practices.
However, we don't have to speculate, I can actually show you how good the Best Costco Hearing Aids are, and if they are programmed well. There are two ways to determine if a hearing aid is programmed correctly.
1. Validation Questionnaires - These questionnaires allow us to obtain a patient's perspective on how they are performing with their hearing aids. I personally like using the International Outcome Inventory for Hearing Aids Questionnaire for individuals who already have hearing aids. Questionnaire Video:
2. Real Ear Measurement - This lets us measure the amplification output of the hearing aids to see if they meet a hearing loss prescription to ensure maximum audibility and speech intelligibility. REM Video:
To illustrate how good some Costco providers are at programming hearing aids, I'll evaluate 3 separate hearing aid fittings of patients who have come into my clinic, and show you the Good, the Bad, and the Ugly of Costco Hearing Aids.
The first patient scored a 30 out of 35 on the IOI-HA which suggests significant benefit from their current hearing devices. Real Ear Measurement illustrated a decent target match of the amplification to the patients Normal to Moderately-Severe Sensorineural Hearing Loss. Overall, I would consider this a GOOD hearing aid fitting. After some adjustments were made to the programming of their devices, they returned to complete a follow-up IOI-HA which increased from a 30 to 34 out of 35 points which is phenomenal.
The second patient scored a 19 out of 35 points on the IOI-HA which suggest poor benefit from their current Costco Hearing Aids. Real Ear Measurement illustrated a poor prescriptive target match of hearing aid amplification, as none of the prescription was being met for a Mild to Moderately-Severe hearing loss. Overall, I would consider this a BAD hearing aid fitting. Fortunately, this patient was fit with unlocked Costco Hearing Aids so they could be reprogrammed. After reprogramming and the completion of the IOI-HA several weeks later, the patient scored a 32 out of 35 total points.
The third patient scored a 9 our of 35 points on the IOI-HA which indicates almost NO BENEFIT with hearing aids. The Real Ear Measurement was so far off of the prescriptive targets for a Moderate Conductive Hearing Loss that one would have to assume that either the Costco Hearing Aid Provider either didn't perform Real Ear Measurement, or they didn't know what they were doing. This let to over a year of frustration and poor hearing due to a lack of competency. To add insult to injury, this patient was fit with Locked Costco Hearing Aids that do not allow for reprogramming outside of Costco. Fortunately, this patient agreed to be fit with new hearing aids that were properly programmed for their hearing loss. After several weeks, this patient returned to complete the IOI-HA and increase their score from a 9 to a Perfect 35 of 35. Indicating significant benefit from their new hearing aids.
I don't share these case studies to discourage anyone from treating their hearing loss at Costco. I share these case studies to prove that even with good hearing aids, the way those hearing aids are programmed will determine how much benefit you receive. So if you don't have a hearing care provider who can maximize your benefit, I highly recommend you find a provider that can.
DIY: How to Rebuild a Starter Motor
Video tutorial on how to rebuild a starter yourself at home. This is a great way to save money considering it’s only about $10 for replacement parts and a rebuilt replacement can around $150 depending on the vehicle. The repair maybe slightly more if you have to replace a solenoid.
Website:
Facebook:
Google Plus:
Twitter:
Instagram:
Tumblr:
Pintrest:
Tools/Supplies Needed:
-new brushes, bushings or bearings, and solenoid
-multimeter
-600 grit aluminum oxide sandpaper
-ratchet and socket set
-paint
-grease
-electrical contact cleaner
-wire brush
-scraper
-clean rags
-degreaser
-pliers
-adjustable wrench
-tape
-paint marker
Procedure:
-remove starter from vehicle
-tape up any exposed holes on the starter
-clean the outside using a scraper and wire brush
-use a paint marker to mark any case seams
-remove the main power cable coming off the solenoid
-remove the outer bolts on the starter case
-these are extremely long and small, so take your time as you can risk breaking them depending on the condition of your starter
-the starter should pop right apart
-do not force the starter apart as there are plastic components which can break
-remove the solenoid
-the plunger will fit into a plastic fork so it does need to be shifted to one side so it can be removed from the unit
-remove rubber cap holding the engagement lever into place, then remove the final drive assembly
-the gear reduction just slides apart and inside you will find a series of gears
-remove the two bolts on the backside and pull off the cap
-remove the small rubber cap on the side that both holds and insulates the cable which just slides out
-pull back on the shaft to help assist the armature and brushes out
-pop the metal clips back and remove the cap on the brush carrier
-fully remove the metal clips and pull the brushes out, be extremely careful not to lose the springs in the process
-using a plastic safe degreasing, clean up any old lubricant on any parts with a clean rag
-disassemble the final drive, there is a c clip at the end of the shaft that holds the pinion gear in place
-remove the pinion gear and clutch assembly, inspect for any damage and replace if necessary
-remove another c clip, this time using needle nose plies to separate the final drive shaft
-clean up everything again with a degreaser
-there will be a bushing inside the case, so inspect that for any damage and replace if necessary
-for reassembly, apply a film of grease to any moving parts
-use a high quality grease throughout the starter motor, something which will maintaining good lubricating qualities in cold climate and not melt under high heat
-the grease will provide lubrication and hold the ball into place, make sure you do not lose it
-there will be a bushing in the end cap housing, therefore make sure it is in good condition with not play, replace if necessary
-I used a hacksaw blade to cut a slit in the bushing, do not cut all the way through as we do not want to mark the casing
-using a chisel, crush the bushing and then you’ll be able to remove it
-clean up any old dirt or lubricant
-gently insert the new bushing with a hammer, once it becomes a little lower, use the old bushing to help assist it into place and ensure it sits into the same location as before
-clean up the armature using electrical contact clean and a tooth brush
-commutator resurface using 600 grit aluminum oxide sandpaper and a drill
-clean up the commutator using electrical contact cleaner and ensure the spaces between the commutator bars are clean
-the mica in these spaces should also be about 1mm lower
-using a multimeter, test the armature
-wash the inside of the start case with contact cleaner to remove any contaminants
-checked the solenoid with a multimeter
-for reassembly, install the final drive back into the case
-apply a light amount of oil to the oilite bushings if desired
-install rubber cap, solenoid and then motor case
-install the new bushes in the carrier and seat using 600 grit aluminum oxide sandpaper so they match the contour of the commutator
-wash everything with electrical contact cleaner
-assembly the starter
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.
8 Smart Questions To Ask Hiring Managers In A Job Interview
Free Tutorial:
Want to know what smart interview questions you should ask hiring managers in a job interview? You're in the right place.
One of the most IMPORTANT job interview questions is actually, Do you have any questions for me? Answer it wrong, and you'll DESTROY your chances of getting the job.
Hiring managers expect you to have interview questions of your OWN when you come in for a job interview. It shows that you value yourself enough to make sure this company is the right fit for you.
In this tutorial, career expert J.T. O'Donnell reveals eight smart questions you should ALWAYS ask during job interviews...
Want to hear all 8 ways you are being shut out of the hiring process? Click this link and get access to J.T.'s FREE VIDEO on what it takes to remove the roadblocks to job search.
Follow Work It Daily:
#JobSearch #InterviewTips #Interview
[Official Video] Cheerleader – Pentatonix (OMI Cover)
TICKETS TO THE FIRST LEG OF ‘PENTATONIX: THE WORLD TOUR' ON SALE NOW
5/11/2019 - Oracle Arena - Oakland, CA
5/14/2019 - Save Mart Center - Fresno, CA
5/16/2019 - The Forum - Inglewood, CA
5/19/2019 - Pepsi Center - Denver, CO
5/21/2019 - BOK Center - Tulsa, OK
5/23/2019 - AT&T Center - San Antonio, TX
5/25/2019 - Von Braun Center - Huntsville, AL
5/26/2019 - KFC Yum! Center - Louisville, KY
5/30/2019 - Greensboro Coliseum Complex - Greensboro, NC
6/1/2019 - Amway Center - Orlando, FL
6/2/2019 - James Brown Arena - Augusta, GA
6/4/2019 - PPL Center - Allentown, PA
6/6/2019 - Madison Square Garden - New York, NY
6/8/2019 - DCU Center - Worcester, MA
6/9/2019 - Mark G Etess Arena - Atlantic City, NJ
6/11/2019 - Centre Bell - Montreal, Canada
6/13/2019 - Mohegan Sun Arena - Uncasville, CT
6/15/2019 - Van Andel Arena - Grand Rapids, MI
6/16/2019 - Nationwide Arena - Columbus, OH
6/18/2019 - Fiserv Forum - Milwaukee, WI
6/20/2019 - Bridgestone Arena - Nashville, TN
6/22/2019 - Taxslayer Center - Moline, IL
6/23/2019 - Resch Center - Green Bay, WI
6/25/2019 - Xcel Energy Center - St. Paul, MN
6/26/2019 - Fargodome - Fargo, ND
6/28/2019 - Scotiabank Saddledome - Calgary, Canada
6/30/2019 - Rogers Place - Edmonton, Canada
7/2/2019 - Rogers Arena - Vancouver, Canada
7/3/2019 - Tacoma Dome - Tacoma, WA
7/6/2019 - Mandalay Bay Events Center - Las Vegas, NV
7/7/2019 - Lake Tahoe Outdoor Arena at Harveys - Stateline, NV
8/11/2019 - Hollywood Casino Amphitheatre - Maryland Heights, MO
8/13/2019 - Starlight Theatre - Kansas City, MO
8/14/2019 - Illinois State Fair - Springfield, IL
8/15/2019 - Ravinia Festival - Highland Park, IL
8/17/2019 - Iowa State Fair - Des Moines, IA
8/19/2019 - Brandon Amphitheater - Brandon, MS
8/20/2019 - Amphitheater at the Wharf - Orange Beach, AL
8/22/2019 - Tuscaloosa Amphitheater - Tuscaloosa, AL
8/24/2019 - Daily's Place - Jacksonville, FL
8/26/2019 - Merriweather Post Pavillion - Columbia, MD
8/27/2019 - Constellation Brands – Marvin Sands Performing Arts Center (CMAC) - Canandaigua, NY
8/29/2019 - Bank of New Hampshire Pavilion - Gilford, NH
8/31/2019 - Bethel Woods Center for the Arts - Bethel, NY
9/1/2019 - Canfield Fair – Canfield, OH
GET ‘THE SOUND OF SILENCE' NOW!
iTunes -
Apple Music -
Spotify -
Amazon -
Google Play -
Join our Patreon Fan Page!!
BUY CHRISTMAS IS HERE!
BUY PTX PRESENTS: TOP POP, VOL.
BUY PENTATONIX THE ALBUM
BUY PTX VOL. 4 - CLASSICS EP
BUY PTX VOL III
BUY PTX VOL II
BUY PTX VOL I
BUY A PENTATONIX CHRISTMAS (DELUXE)
BUY THAT'S CHRISTMAS TO ME (DELUXE)
BUY PTXMAS
STREAM CHRISTMAS IS HERE!
STREAM PTX PRESENTS: TOP POP, VOL.
STREAM PENTATONIX THE ALBUM
STREAM PTX VOL. 4 - CLASSICS EP
STREAM PTX VOL III
STREAM PTX VOL II
STREAM PTX VOL I
STREAM A PENTATONIX CHRISTMAS (DELUXE)
STREAM THAT'S CHRISTMAS TO ME (DELUXE)
STREAM PTXMAS
ON MY WAY HOME
THE DOCUMENTARY | AVAILABLE NOW!
ITUNES:
AMAZON:
@ptxofficial
@ptxofficial
Planet Zoo Franchise Mode! Can we make money??
????Twitter!
????Twitch!
????Discord!
House Impeachment Inquiry Hearing - Hill & Holmes Testimony
Fiona Hill, a former National Security Council senior director for Europe and Russia, and David Holmes, counselor for political affairs at the U.S. Embassy in Ukraine testify at a House Intelligence Committee impeachment hearing.
For more on the impeachment inquiry and the administration's response, visit
For timely highlights, follow C-SPAN on Twitter
For information and to engage with others, visit and follow C-SPAN's Facebook page
Follow C-SPAN on Instagram
And for daily or weekly email newsletters, connect with C-SPAN by visiting and choosing what interests you most.
The National for Tuesday August 22nd: Battle Remembered, Placenta Warning, N. Korea Fears
Welcome to The National, the flagship nightly newscast of CBC News
»»» Subscribe to The National to watch more videos here:
Voice Your Opinion & Connect With Us Online:
The National Updates on Facebook:
The National Updates on Twitter:
The National Updates on Google+:
»»» »»» »»» »»» »»»
The National is CBC Television's flagship news program. Airing seven days a week, the show delivers news, feature documentaries and analysis from some of Canada's leading journalists.
06/13/19 Planning Commission Meeting
Coverage of the Metropolitan Nashville Planning Commission Meeting held on June 13-14, 2019