The Crescent Hotel and Haunted Hallways
The Crescent Hotel of the year 1886. With a lot happening in its past, many ghosts walk the hallways and rooms.
Stampede Bed and Breakfast Hotel - Tombstone, Arizona
Stampede Bed and Breakfast 4 Stars Hotel in Tombstone, Arizona Within US Travel Directory This Tombstone B&B serves a daily fully cooked breakfast and has an on-site bakery. It is less than half a kilometer away from the historic O.K. Corral. All cottages feature free Wi-Fi.
A flat-screen satellite TV is included in each cottage at Stampede Bed & Breakfast. All of the air-conditioned cottages provide a microwave and a refrigerator. Select cottages offer fully equipped kitchens complete with an oven and a stove.
The home cooked breakfast at Stampede B&B is served daily between 07:00 and 10:00 7 days a week. Breakfast includes sausage, bacon, toast, English muffins, eggs, waffles, tea, juice and coffee.
Tombstone town centre and attractions such as the Birdcage Theater and the Good Enough Mine are within a half mile walk away from this B&B. Hiking and cycling opportunities are available in the surrounding area.
Arkansas Paranormal Investigations
Orb caught at Yellville Akansas home (Center) for more info visit our web site at paranormalbeliever.com
Arkansas Paranormal Investigations (API)
During the course of the Old Hardy Hotel investigation, this unknown energy source was caught on the second floor hallway. for more information please visit our website paranormalbeliever.com
Otis elevators + urbex at the La Quinta Inn Little Rock AR
Arkansas Paranormal Investigations (API)
During recent investigation in Bentonville Feb 13, 2010 , this energy was captured on one of the night vision cameras. we validated that this was not any Airborn debre. This was captured in the Kitchen area were reports of activity have been claimed. For more information check out our Web site:
paranormalbeliever.com (disregard the date and time, we had to use a new DVR and did not setup the date and time). Other DVR crashed.
Arkansas Paranormal Investigations Case 128 (orb1)
During an investigation in Springdale Arkansas This Orb energy was captured by one of our IR cameras. While Orb activity is not an indicator of a haunting. Where you have a lot of these Orb (energy) and it takes energy to have paranormal activity. these are a good indicator. for more information visit us on the web. paranormalbeliever.com
One of The Most Haunted Abandoned Hospitals We've EVER Investigated | THE PARANORMAL FILES
???? In one of our scariest episodes of all time, Colin & Jeff spend the night inside an abandoned old miner's hospital in Ajo, Arizona. The paranormal activity that they captured there was terrifying and real. Viewer beware, you're in for a scare! ????
???? FOLLOW OUR VLOG CHANNEL!: ????
???? WE HAVE NEW MERCH!:
???? SUBSCRIBE to the channel with ONE CLICK! (be sure to turn your notifications ON):
????We're on INSTAGRAM!
Colin (Personal):
Payton (Personal):
THE PARANORMAL FILES (Official Account):
THE PARANORMAL FILES (MEME ACCOUNT!):
????Join us on FACEBOOK for exclusive content and live videos!:
????Listen to Colin's music (“Sun, Sand & Sadness”!):
Arkansas Paranormal Investigations (API)
During the Bentonville Residence investigation of February 13, 2010 the Camera in the master Bedroom actually fogged up after several hours of operation. This was a result of a drastic tempature change that took place. over a period of 4 minutes. once Investigators check into this you will see the camera go back to normal. keep an eye on the ball in the middle of the screen. (NOTE: the date and time on this were default and were not set to reflect the correct month, year and time).
ghost2
ghost footage caught at Charles' Lil Shop of Coffee in Batesville, AR.
Antikythera Fragment #5 - The First Precision Drill Bit
Antikythera Fragment #5 - The First Precision Drill Bit, by Clickspring.
There are a number of cutting tools implied in the wreckage of the Antikythera Mechanism, and one of the most interesting is the drill bit. In this video I explore a possible method of how an effective and precise drill bit could have been made in antiquity.
The video where I show the carburisation process in detail can be found here:
If you would like to help support the creation of these videos, then head on over to the Clickspring Patreon page:
________________________________________________________
A very special thank you to Patrons:
Sinking Valley Woodworks (
Glenn Trewitt
Christopher Warnock
Mike Manfrin
Steven Sladewski
Rollin W. Patrick, Jr.
Jim Popwell
Gary Levario
Pete Askew
Norman Lemke
Andre van Soest
Andrew Smith
Bernd Fischer
Rudolph Bescherer Jr
Sam Towne
Adam Slagle
Jack Cause
Jeremiah G. Mort
Dave Seff
Olof Haggren
Stassinopoulos Thomas
Florian Ragwitz
Larry Pardi
Michael Harmon
Lonnie Koehn
Tim Bray
________________________________________________________
You can also help me make these videos by purchasing via the following Amazon Affiliate links:
Cameras used in this video:
Panasonic GH5 -
Panasonic X920 -
Tools & Shop Products:
Solidworks 2013 Bible:
Hardening, Tempering and Heat Treatment (Workshop Practice Series) -
Salamander A-6 SUPER Clay Graphite Morgan Melting Crucible:
Norton 1-by-2-by-8-Inch Fine/Coarse India Combination Oilstone, Red:
Saint Gobain (Norton) - 4 Arkansas Stones + case:
Abbreviated Transcript:
00:12 The existence of an Ancient style of drill bit is strongly implied in the wreckage of the Antikythera Mechanism. And its fabrication would have likely hinged on a crucial process: The ability to take a malleable wrought iron, and transform it into something hard enough to cut bronze.
00:28 I've covered the process in detail in a separate video, but essentially it involves packing an animal based charcoal and salt around the soft iron, sealing it in clay, and then heating it up to a red heat I'm using a low carbon mild steel as a substitute for Ancient wrought iron. Its soft and ductile.
01:00 But there are some great examples of long slender turning to be found within the wreckage of the mechanism itself. There's a shaft that extended from the lunar phase gearing up to the phase display on the front dial that's roughly 4mm in diameter.
01:16 And there are numerous other pins and shafts, some less than a mm in diameter. I'm using a modern furnace for convenience, but a traditional charcoal furnace is quite capable of generating the required temperature. Once at a red heat, the process of carburising the iron is purely a time exercise.
01:51 So I reheated the rods, rolled them straight on a flat surface, and then requenched. The once soft metal is now very hard, but also extremely brittle, and so easily fractures under a light bending load. So to be of use as a cutting tool, it needs to be tempered, in this case to a light straw color.
02:40 I can see this end of the rod is a good straight section, so that'll become the actual bit, and the excess will be removed at the end of the process. A gentle heat raises the temperature of the rod until a pale straw color just reaches what will become the cutting end. The material is now in a tempered state. Still very hard, but tough rather than brittle.
03:23 Despite no longer being widely used, it still has a number of attributes to recommend it. The first being that its very easy to make. Because the primary surfaces can all be formed by hand, on flat abrasive stones. The cutting edges can be shaped for unidirectional cutting, or as in the case that I'm showing onscreen, for single direction cutting.
03:59 And once the operational length has been decided, it can be permanently set by scoring the metal with a file, and then snapping off the excess material.
04:38 In its rigid cross section form, this sort of drill bit will often perform much like a traditional D bit. Delivering a very straight deep hole. Now there is of course an obvious drawback to the drill bit design: The need to repeatedly withdraw it from the work to clear the chips.
05:36 As soon as the cutting edges start to dull, a quick hit on the stones will bring them back to original condition. Now you won't want to throw out your twist drills any time soon, but its a great option to keep in mind for those rare occasions when you really do need a custom drill bit.
References:
Watchmaking by Daniels:
The many books and DVD's by WR (Bill) Smith:
Antikythera Fragment #5 - The First Precision Drill Bit, by Clickspring.
???? SETH BULLOCK'S SPIRIT still HAUNTS the HALLS of his HAUNTED HOTEL (2018 vlog HD) ????
WHO WAS TALKING TO US??
????????YOU WON'T BELIEVE WHAT YOU'RE SEEING...????????
???? !!! PLEASE SUBSCRIBE TO THE CHANNEL !!! IT ONLY TAKES ONE CLICK !! : (be sure to turn your notifications ON)
LIKE & FOLLOW OUR SOCIAL MEDIA FOR TONS OF EXCLUSIVE CONTENT (including an exclusive video on Facebook TOMORROW)!!
????FACEBOOK:
????INSTAGRAM: @THEPARANORMALFILES
????TWITTER: @PFILESOFFICIAL
????SUPPORT OUR SHOW BY BUYING OUR FIRST OFFICIAL SELF-PRODUCED MERCH WITH PAYTON'S HAND-DRAWN DESIGN:????
-
????WATCH THE FULL FIRST SEASON OF COLIN’S NEW SHOW, “TEEN SPIRIT”, FOR FREE ONLINE NOW:
-
LISTEN TO COLIN'S ALBUMS, A BEAUTIFUL NIGHT TO DIE and 40'S AT THE LINKS BELOW!!!:
A BEAUTIFUL NIGHT TO DIE (Colin's SOLO album):
40'S (DEATHCORE RAP):
OR
-
-
-
In this episode of “The Paranormal Files”, Colin and Payton travel to the basement of the Bullock Hotel to wrap up their stay in Deadwood, South Dakota. Did they conjure the spirit of Seth Bullock himself??
-
-
-
After over a year on hiatus, THE PARANORMAL FILES IS BACK. After filming across the nation and in 4 different countries, Colin and his Paranormal Files team present their findings of paranormal activity in the new wave of Paranormal Files videos.
-
THE PARANORMAL FILES is an independent paranormal investigative show which explores paranormal themes in a way unexplored by television crews before. Instead of only focusing on specific places to investigate and single cases to handle, Colin and his Paranormal Files team place their focus on haunted locations, stories, unexplainable phenomenas, religious beliefs and local legends in order to grant viewers with a true grasp of the truth behind spirits and other worlds.
Be sure to Subscribe to The Paranormal Files (Official Channel) in order to stay up-to-date with the latest episodes of The Paranormal Files!
-
Subscribe and Stay Spooky!
Follow Colin on Instagram & Twitter:
COLIN BROWEN:
TWITTER/INSTAGRAM: @colinbrowen
SOUNDCLOUD:
MUSIC YOUTUBE:
FOLLOW PAYTON ON INSTAGRAM:
INSTA: @payton.e
Colin's music releases as both KID $POOKY and his collective the $POOKYGANG, are available now, on Spotify, iTunes and Soundcloud. Keep on the lookout $$$.
(c) 2018 Blood in the Sink Pictures
I Still Can’t Believe What This Spirit Did to ME in This Haunted Hotel | THE PARANORMAL FILES
???? I wish we could find the photo of that pirate... damn was he spooky!! ????
???? SUBSCRIBE to the channel with ONE CLICK! (be sure to turn your notifications ON):
????We're on INSTAGRAM!
Colin (Personal):
Payton (Personal):
THE PARANORMAL FILES (Official Account):
????Join us on FACEBOOK for exclusive content and live videos! Heck, even shoot us a message and just say hi!:
????WE HAVE MERCH! Buy a piece and support the production costs of the show! (Our logo was HAND DRAWN by Payton!):
????Listen to Colin's music!
(c) 2018 Blood in the Sink Pictures
50 Most Haunted Places in all 50 States Written By Jessica Ferri
50 Most Haunted Places in all 50 States- Written By Jessica Ferri
Click here to SUBSCRIBE to Duchess Dark-
Get in touch with me by
Joining me on my social media:
Twitter -
Instagram -
Facebook -
Horror Amino - DuchessDark
Snapchat - grren_jello
OR
Email - duchessdark676@gmail.com
OR
Send me a message here or comment on a video
Creepypasta Playlist –
True Story Playlist –
Serial Killer Saturday Playlist-
Video Music-
Dr. Creepen Van Pasta -Music for #creepypasta 20 - Subterraneous Choir
Check out his you tube channels and his soundcloud-
Arkansas Ghost Hunters - Haskell House Investigation
Arkansas Ghost Hunters - Haskell House Investigation
This video is very basic, however it really shows some of the things we faced on going investigations. Sincerely to those who think its easy, and fun. IT'S NOT. So there isn't too much paranormal on this one, but it's still worthy of a view.
Interview: Magic And Ghost-Talking In St. Paul
Sean-Paul and Juliana Fay spoke with Ali Lucia and Kim Johnson about their shows at the Triune Masonic Temple (4:15).WCCO 4 News At Noon – Jan. 25, 2017