Explorer autonomous underwater vehicle is a Chinese AUV developed in the People's Republic of China , first entering service in November 1994. It should not be confused with another two Anglo-American AUVs that share the same name: the American Autonomous Benthic Explorer AUV built by Woods Hole Oceanographic Institution, and the British Columbia-based International Submarine Engineering built Canadian Explorer AUV, which is based on its earlier ARCS AUV. Explore AUV is the first member of a series of Chinese AUVs later developed, all of which are based on Explorer AUV. Explorer AUV is one of the projects of 863-512 subprogram of the 863 Program in PRC, developed by a joint team of research and educational establishments including the 702nd Research Institute of China Shipbuilding Industry Corporation , Shenyang Institute of Automation of Chinese Academy of Science, Shipbuilding Engineering Institute of Harbin Engineering University , Institute of Underwater Engineering of Shanghai Jiao Tong University , and other establishments totaling over a dozen. Feng Xisheng , a professor of Shipbuilding Engineering Institute of HEU was named at the general designer of Explorer AUV, while Xu Huangnan , a professor of School of Naval Architecture, Ocean and Civil Engineering of SHJTU and the general designer of 8A4 class ROUVs, was named as the deputy general designer of Explorer AUV. Explorer AUV is the first AUV of PRC. The brain of Explorer AUV consists of three computers: central control computer, positioning computer, and imagery computer. In addition to controlling the interface tracing the traveling path and the interface controlling the surveillance of the system, the central control computer controls the interface controlling remotely operated module so that in addition to being able to operate as an AUV, the Explorer AUV can also be operated as a remotely operated underwater vehicle . To accurately provide the positional parameters of the Explore AUV in the water such as pitch, row, yaw, depth, distance and location, the navigational system of the Explorer AUV utilizes a number of methodologies, including GPS, Doppler Velocity Measurement, directional gyro, short baseline positioning, ultra short baseline positioning, visual tracking and fluxgate compass. Information provided by these subsystems are fed and processed by the navigational computer on board. The compressed underwater television images are handled by the imagery computer. These on board electronics are powered by the main propulsion system consisted of lead-acid batteries with 120 V direct current, which is converted to 220 V alternate current to power the electronic equipment. The communication system of Explorer AUV consists of surface communication subsystem and underwater communication subsystem, and the two are linked via acoustic communication module, which passed the information received from underwater communication computer and pass it on the central computer. The central control computer analyzes this information, including sending the compressed television imagery signals to imagery computer, which in turn, convert the information to display the image on the screen. The communication between the central control computer and positioning computer is achieved via RS-232 interface, while GPS information is received from the positioning computer via EIA-422 interface. In addition to sending the information to control the AUV, the central computer is also designed to communicate and interface the operating console on the mother ship when needed. The underwater communication system of Explorer AUV consists of two major components, the sonar controlling module and communication computer . The sonar controlling module is tasked to control acoustic communication module, Doppler sonar, side-looking sonar, and other sonars, while communication computer is tasked to act as an interface between various onboard subsystems.The sonar control module is also tasked to process the imagery data, compress the data, and communicate with the communication computer. Numerous sensors were installed on board Explorer AUV to provide the necessary information for the AUV to operate, and these environmental subsystems consisted of underwater cameras and sonar. Information gathered is recorded on board the AUV while is also passed to the operator console on the mother ship at the same time, and the camera is capable of store 250 high resolution photos. The information gathered for navigation is also used to control the AUV, and extensive built-in diagnostic system can automatically fix minor problems, and alert the mother ship of major mishaps that cannot be fixed automatically, while directing the AUV to ascend to surface at the same time. The success of Explorer AUV provide the foundation for Chinese cooperation with Russia to jointly develop the next Chinese AUV, the WZODA AUV. Specifications: Length: 4.4 meters Width: 0.8 meters Height: 1.5 meters Weight: 2.2 tons Speed: > 4 kt Side-traveling speed: > 1 kt Diving speed: > 0.5 kt Maximum operating depth: 1 km Propulsion: Electrically powered propellers Power: lead–acid batteries
Continue reading...From
Wikipedia, the free encyclopedia.